The characteristics of municipal solid waste (MSW) treated by the Hebei MSW incinerator are as follows: kitchen waste 44.56%, paper 13.06%, rubber 11.11%, textile (fiber) 0.24%, wood and bamboo 28.07%, ash and soil 0%, bricks, tiles, and ceramics 0.76%, glass 1.79%, metals 0.42%, and others 0%. Moisture content is 53.67%, higher calorific value of 7715.05 kJ/kg, and lower calorific value of 5778. 27 kJ/kg. Waste treatment activities are based on an average urban/public waste mixture, not suitable for single specific wastes such as plastics, paper, cardboard, etc. If your waste is a specific waste mixture, please inventory the corresponding waste separately. Each kg of this waste will produce 0.205 kg of slag and 0. Fly ash and furnace slag, after precious metal recovery, are landfilled, with fly ash and cement mixed at a ratio of 1:1 for solidification. The average heat efficiency of waste heat power generation is 22%; during the waste heat supply process, there is no conversion between different forms of heat and energy, leading to a higher thermal efficiency, averaged at 64%. Through a combination of the heat efficiency during waste heat power generation and direct heat supply, 15% of the heat generated from waste incineration is used for power generation, while 56% is used for direct heating.