The characteristics of urban solid waste processed by the municipal solid waste incinerator (MSWI) in the rural areas of Shanghai are as follows: kitchen waste 50%, paper 2%, rubber 5%, textile (fiber) 10%, wood and bamboo 3%, ash and soil 15%, bricks, tiles, and ceramics 0%, glass 15%, metal 0%, and other 0%. Moisture content is 47.62%, higher calorific value of 4281.85 kJ/kg, and lower calorific value of 2654. 75 kJ/kg. Waste treatment activities are based on an average urban/public waste mixture and are not suitable for individual specific wastes such as plastics, paper, cardboard, etc. If your waste is a specific waste mixture, please inventory the corresponding waste separately. For this kind of waste, 0.205 kg of slag and 0... Fly ash and slag, after the recovery of precious metals, are landfilled. Fly ash is mixed with cement at a ratio of 1:1 for solidification treatment. The average thermal efficiency of waste heat power generation is 22%. In the process of waste heat supply, no different forms of heat and energy conversion have been performed, so the thermal efficiency is relatively high, averaging 64%. Through a comprehensive look at the thermal efficiencies of waste heat power generation and direct heat supply, 15% of the heat produced during waste incineration is used for power generation, and 56% is used for direct heating.