The characteristics of the urban solid waste processed by the Xinjiang municipal solid waste incinerator (MSWI) are as follows: kitchen waste 76%, paper 2.4%, rubber 5.4%, textile (fiber) 4.2%, wood and bamboo 2.5%, ash and soil 0%, brick, tile and ceramics 6.4%, glass 2.4%, metal 0.8%, and other 0%. The moisture content is 60.15%, the higher calorific value of 4148.64 kJ/kg, and the lower calorific value of 2183. 4 kJ/kg. Waste processing activities are based on an average urban/public waste mixture, not suitable for individual specific waste such as plastics, paper, cardboard, etc. If your waste is a specific waste mixture, please itemize the corresponding waste separately. Each kg of this waste will produce 0.205 kg of slag and 0. The fly ash and slag, at a ratio of 0.5kg, are subjected to precious metal recovery before being landfilled; the fly ash is solidified with cement in a 1:1 ratio. The average heat efficiency of waste heat power generation is 22%; during the waste heat supply process, there is no conversion between different forms of heat and energy, resulting in a high thermal efficiency, averaging 64%. By comprehensively considering the heat efficiency of the waste heat power generation process and the direct heat supply process, 15% of the heat generated during the waste incineration process is used for power generation, and 56% is used for direct heating.