The characteristics of municipal solid waste (MSW) processed by the Municipal Solid Waste Incinerator (MSWI) in the urban area of Pingdingshan city, Henan province, are as follows: food waste 61.36%, paper 10.11%, rubber 18.47%, textiles (fibers) 1.01%, wood and bamboo 0.78%, ash and soil 1.43%, bricks, tiles, and ceramics 1.01%, glass 4.56%, metals 1.28%, and others 0%. The moisture content is 55.93%, higher calorific value of 6114.91 kJ/kg, and lower calorific value of 4177. 81 kJ/kg. Waste treatment activities are based on an average urban/public waste mixture and are not suitable for single specific waste materials such as plastics, paper, cardboard, etc. If your waste is a specific waste mixture, please inventory the corresponding waste separately. Each kg of this waste will produce 0.205 kg of slag and 0. The fly ash and slag, after the recovery of precious metals, are landfilled. The fly ash is solidified in a 1:1 ratio with cement. The average thermal efficiency of waste heat power generation is 22%; the waste heat supply process does not involve different forms of heat and energy conversion, so the thermal efficiency is relatively high, averaging 64%; through a comprehensive analysis of the thermal efficiency of waste heat power generation and direct heat supply, 15% of the heat generated during the waste incineration process is used for power generation, and 56% is used for direct heating.