The municipal solid waste treated by the municipal solid waste incinerator (MSWI) in the urban area of Tumen City, Jilin Province has the following characteristics: kitchen waste 61.35%, paper 8.36%, rubber 0.6%, textiles (fibres) 4.25%, wood and bamboo 1.71%, ash and soil 0%, brick, tile and ceramics 9.73%, glass 0%, metals 0%, others 14%. Moisture content 55.34%, higher heating value 4535 kJ/kg, lower heating value 2749 kJ/kg.
The waste treatment activity is based on an average municipal/public waste mixture and is not suitable for a single specific waste such as plastics, paper, paperboard, etc. If your waste is a specific waste mixture, please inventory the corresponding waste separately. Each kg of this waste generates 0.205 kg of bottom ash and 0.05 kg of fly ash; the bottom ash is landfilled after precious metal recovery, and the fly ash is solidified with cement at a 1:1 ratio.
The thermal efficiency of waste-heat power generation is taken as the average value of 22%; during waste-heat supply no conversion between different forms of heat and energy is carried out, so the thermal efficiency is relatively high and is taken as the average value of 64%. By integrating the thermal efficiencies of the waste-heat power generation process and the direct heat supply process, 15% of the heat generated during waste incineration is used for power generation and 56% is used for direct heating.