This process includes oil extraction and surface processing stages. It encompasses methane emissions (fugitive emissions and flaring) in specific regions, produced water discharges, and direct energy use during oil production, including drilling, oil pumping, steam injection, and flaring. Flaring refers to the practice by oil and gas enterprises of transferring combustible waste gases generated during various production processes to a flare system or waste gas combustion system for incineration. Additionally, emissions from spills related to drilling and pumping operations are included in this inventory, but crude oil spills associated with transportation and refining are not included. The production of crude oil and natural gas is often closely related and requires material allocation, typically based on energy content to ensure scientific fairness and rational distribution. Heavy oil reservoirs refer to reservoirs where the viscosity of the stored crude oil exceeds 50 mPa·s under reservoir conditions. Due to their high viscosity and poor fluidity, heavy oil is difficult to extract. Heavy oil fields with >80% water cut indicate a water content in produced fluids exceeding 80%; this section assumes a water cut of 90%. The net calorific value of crude oil is 43.4 MJ/kg, with an average calorific value of natural gas at 36 MJ/Sm³. Modeled using representative data from production technologies that reflect the average production level in China. This dataset is based on literature data and has been optimized and modeled using the best available information from 2023.