This process includes the oil extraction phase and the surface handling phase. It covers methane emissions (fugitive emissions and flaring) in specific regions, produced water discharges, and direct energy use during oil extraction, including drilling, oil pumping, gas injection, and flaring. Flaring refers to the practice by oil and gas companies of channeling combustible waste gases generated during various production processes into a flare or waste gas combustion system for incineration. Furthermore, emissions from spills associated with drilling and pumping operations are included in this inventory, although crude oil spills related to transportation and refining are not included. The production of crude oil and natural gas is often closely related, requiring material allocation, typically based on energy content to ensure scientific fairness and rational distribution. Heavy oil reservoirs refer to reservoirs where the viscosity of crude oil under reservoir conditions exceeds 50 mPa·s. Crude oil in heavy oil reservoirs has high viscosity and poor fluidity, making it difficult to extract. Low permeability oilfields with water cut <80% refer to those where the water content in the produced fluid from production wells is below 80%; this entry assumes a water cut of 75%. The net calorific value of crude oil is 43.4 MJ/kg, with an average calorific value of natural gas being 36 MJ/Sm³. Modeled using representative data on production technologies, this dataset reflects the average production level in China. The dataset is based on literature data and has been optimized and modeled using the best available information from 2023.