Cradle to Consumer
Identity ID
282950ca-7a5a-4fc2-a9a1-34787521a6e0
Materials
Associated ID
2c449ca5-8d68-4110-afbe-c9e91bc4563a
Included activities starts
Included activities ends
Description
This dataset is a market dataset, representing the consumption market of the region; the dataset includes the transport of the product from the gate to the consumer end, and the transport service is calculated according to the transport situation of this product in this region. Ethylene is one of the most basic raw materials of petrochemicals, widely used in the manufacture of plastics such as polyethylene (PE), high-density polyethylene (HDPE), polystyrene (PS) and polyvinyl chloride (PVC); Ethylene is modelled as a pure substance; when modelling this substance the user needs to add a solvent of their choice in the model; the dataset contains the main raw and auxiliary materials, energy, waste and atmospheric emissions of the production process, in which the preliminary treatment of wastewater in the auxiliary units and the waste gas treatment process are included within the dataset boundary, and infrastructure such as the manufacture of production equipment and the construction of plant buildings is not included within the dataset boundary; the data inventory is formed by merging data from multiple sources; the production activities of this product include feedstock cracking, separation and waste heat recovery; the dataset contains multiple products, allocated by mass.
Activity Description
The production activities of this product include raw material cracking, separation, waste heat recovery and other processes.
Process Description
Ethylene has the chemical formula C2H4 and CAS number 74-85-1. At ambient temperature and pressure, it is a colorless, flammable gas with a faint characteristic hydrocarbon odor. It is soluble in alcohol and diethyl ether but only slightly soluble in water and is chemically reactive. It has a freezing point of -169.4°C, a boiling point of -103.71°C, a relative density of 0.5699 at -103.8°C, a refractive index of 1.363, a flash point below -66.9°C, a critical temperature of 9.90°C, a critical pressure of 4.95 MPa, a critical density of 0.227 kg/L, an expansion coefficient of 0.006894 at -17.8°C, and a latent heat of vaporization of 495.98 J/g at the boiling point. Ethylene is one of the most fundamental petrochemical feedstocks and is widely used to manufacture plastics such as polyethylene (PE), high-density polyethylene (HDPE), polystyrene (PS), and polyvinyl chloride (PVC).
Time period
2016
2026
Geography
China,Jiangsu
Macroeconomic value
Business-as-Usual
Data validation
Yes
Technology
Current Technology
Technology comment
This dataset models a feedstock mix of naphtha, propane, and liquefied petroleum gas. At 800-900°C in a cracking furnace, longer-chain saturated hydrocarbons are broken down into shorter unsaturated compounds. The main products include ethylene and propylene, with hydrogen, mixed C4 hydrocarbons, and other co-products. Cracking-unit designs are broadly similar and require only minor modifications for local conditions. Naphtha remains the principal feedstock, although the shares of light components such as propane and butane and liquid feedstocks such as liquefied petroleum gas have increased in recent years. A portion of the by-product fuel gas is used in the cracking furnaces.
1. Cracking: Feedstocks entering the plant are preheated, mixed with dilution steam, and heated before cracking in the radiant section of the furnace. Liquid-feed furnaces use highly selective radiant coils for high-severity cracking, while gas-feed furnaces use multi-pass coils. Cracked gas is sent to the downstream separation section. Both liquid- and gas-feed furnaces are bottom-fired.
2. Separation: Heat is recovered from the cracked gas in a waste-heat boiler, after which the gas serves as stripping medium in the gasoline fractionator. The fractionator bottoms leave the plant as crude fuel oil, while the overhead stream is quenched in a quench-water tower and sent to compression. The demethanizer bottoms are sent to the deethanizer, and the deethanizer overhead enters an acetylene converter, where acetylene is selectively hydrogenated to ethylene and ethane.