Cradle to Gate
Identity ID
59912d86-1f27-4d7e-ba94-6c13e0a2154f
Materials
Associated ID
eec539fa-b383-4770-9427-321bbdaef740
Included activities starts
Included activities ends
Description
This dataset represents the life cycle inventory (cradle-to-gate) from geological exploration in underground mining to the production of raw coal, covering all activities related to raw coal production, but excluding the coal washing and preparation processes, as well as direct or indirect greenhouse gas emissions from the production of equipment such as conveyors and mining vehicles, personnel commuting, and daily office operations during coal production. The dataset is formed by merging data from multiple sources according to national standards such as "Clean Production Standard for Coal Mining and Selection Industry" (HJ 446-2008), "Emission Standards of Pollutants for the Coal Industry", and "Soil Environmental Quality Standards of the People's Republic of China", and is representative of the average production level in Jiangxi.
Activity Description
This dataset describes underground coal mining, with the following process steps:
1. Drivage of roadways
The first step in underground mining is the drivage of roadways, which involves creating access tunnels to the coal seams. These roadways are typically excavated using roadheaders or by blasting. Roadways are categorized into main tunnels (such as haulage and ventilation roadways) and auxiliary tunnels (such as pedestrian passages and drainage tunnels), serving functions including coal transportation, ventilation, personnel access, and movement of equipment and waste materials. Coal Mining
After the completion of tunnel excavation, coal extraction is the core step in underground mining. Depending on the structure, thickness of the coal seam, and mining technology, different coal mining methods are adopted. Common underground mining methods include:
Longwall Mining: A large-scale mining method where the coal seam is extracted over a wide area at once, usually accompanied by tunnel support.
Room and Pillar Mining: The coal seam is divided into small blocks, supported by pillars, and extracted progressively. Machinery and Equipment
Coal mining and transportation processes heavily rely on machinery and equipment, including:
Shearer: Used for cutting coal seams in longwall mining.
Hydraulic Supports: Support the roof to prevent tunnel collapse.
Continuous Miner: Used for tunnel excavation.
Belt Conveyor: Transports extracted coal from the working face to the transportation system. Underground + In-plant Transportation
Underground transportation refers to moving coal from the working face to the shaft portal, typically using belt conveyors or mine carts. After reaching the portal, coal is transported to the coal preparation plant or external markets via in-plant transportation systems (such as belt conveyors or trains). Improving efficiency in this phase directly affects the efficiency of the entire production process.
5. Ventilation
Ventilation systems are an essential component of underground mining. Due to the confined nature of underground operations, ventilation systems must ensure a continuous supply of fresh air, remove hazardous gases (such as methane) and dust, and safeguard worker health and safety. A typical ventilation system consists of fans, ducts, and air outlets, which collectively maintain airflow underground.
6. Pollutant Treatment and Disposal
Main pollutants generated during underground mining include:
Mine Water: Typically containing coal dust, suspended solids, and chemical substances, it requires treatment through sedimentation tanks and water treatment facilities.
Coal Dust: Harmful to miners' health and the environment, it is usually controlled by wet dust removal, spray suppression, and other methods.
Waste Residue: Mine waste and gangue are transported to the surface, stored in designated areas, and managed with land reclamation. Ecological Restoration and Management
The impact of underground mining on the surface environment is mainly reflected in ground subsidence, changes in groundwater flow direction, etc. Therefore, ecological restoration measures include:
Land Reclamation: Filling subsidence areas caused by mining to restore agricultural use or vegetation coverage.
Water Resource Management: Restoring groundwater systems and preventing water pollution or loss.
Vegetation Restoration: Planting vegetation in affected areas to prevent soil erosion and improve the ecological environment.
Process Description
Jiangxi Province is rich in coal resources, which have been developed early and are traditionally known for coal production. In Jiangxi's coal-bearing strata, the Upper Permian Leping Formation and the Upper Triassic Anyuan Formation account for more than 95% of reserves, making them the primary targets for exploration and development. The coal types and grades in Jiangxi are relatively complete; in addition to lignite, gas coal, fat coal, coking coal, lean coal,贫煤, meager coal, and anthracite are all present. The coal species distribution varies among different coal measures. Overall, the ash content of raw coal in Jiangxi ranges from 5.17% to 45%, the volatile matter from 4.49% to 40%, the total sulfur from 0.4% to 3.28%, and the carbon content from 86.35% to 95%. 7%, with Qnet,ar net calorific value on as-received basis ranging from 4080 to 8460 kcal/kg.
Time period
2022
2026
Geography
China,Jiangxi
Geography comment
Forming Jiangxi's average data through merging data from multiple sources.
Macroeconomic value
Business-as-Usual
Data validation
Yes
Technology
Current Technology
Technology comment
Underground mining, including tunneling, coal extraction, machinery and equipment, underground and in-plant transportation, ventilation, pollution treatment and disposal, ecological restoration and management.