Cradle to Gate
Identity ID
6b51776b-81a6-4506-ad59-a937961bbf3c
Waste treatment
Associated ID
ffb43e14-9941-4752-80e7-18bdbbe4f460
Included activities starts
Included activities ends
Description
The composition of municipal solid waste treated by the Jilin municipal solid waste incinerator (MSWI) are as follows: kitchen waste 43%, paper 4.9%, rubber 15%, textiles (fibers) 2.7%, wood and bamboo 2.7%, ash and soil 0%, bricks, tiles and ceramics 4.6%, glass 2.6%, metals 0.5%, others 24%. Moisture content is 55.81%, higher heating value is 6171.51 kJ/kg, and lower heating value is 4526. 37 kJ/kg.
Waste treatment activities are based on an average municipal/public waste mixture and are not suitable for single specific waste types such as plastic, paper, cardboard, etc. If your waste is a specific waste mixture, please separately account for the corresponding waste streams. Each kg of this waste generates 0.205 kg of slag and 0.05 kg of fly ash is landfilled after precious metal recovery from boiler slag, and the fly ash is treated by solidification with cement at a ratio of 1:1.
The average thermal efficiency for waste heat electricity generation is assumed to be 22%; during the waste heat heating process, no different forms of heat and energy conversion are involved, thus the thermal efficiency is higher, with an average value of 64%. By integrating the thermal efficiencies of the waste heat electricity generation and direct heat supply processes, 15% of the heat generated from waste incineration is used for electricity generation and 56% for direct heating.
Activity Description
After waste enters the incineration plant, it is first piled and stored, during which leachate is generated due to the high moisture content of the waste. Subsequently, the stored waste is fed into the incinerator for combustion. The flue gas produced during incineration is treated through flue gas purification systems. The resulting solid residues include bottom ash and fly ash, with bottom ash deposited at the bottom of the incinerator and fly ash carried away with the flue gas. The heat generated from incineration is utilized for power generation or heating, achieving resource recovery. The electricity produced from waste heat recovery can be sold externally or reused within the incineration plant.
Process Description
"Municipal solid waste" is primarily generated from a wide range of activities across many different sectors. "Municipal solid waste" includes the following components: kitchen waste, paper, rubber, textiles (fibers), wood and bamboo, ashes and soil, bricks, tiles and ceramics, glass, metals, and potentially other fractions. This by-product (recyclable or waste) arises from common transformation activities and can therefore be considered for modeling waste outputs of similar composition. In the HiQ database, treatment methods for this by-product include: landfilling – sanitary landfill, municipal incineration. Additionally, this by-product is used in the following process: clinker production.
Time period
2022
2026
Geography
China,Jilin
Geography comment
National statistics, literature research
Macroeconomic value
Business-as-Usual
Data validation
Yes
Technology
Current Technology
Technology comment
In China, 90% of waste-to-energy power plants use mechanical grate incinerators for their furnaces, with waste heat boilers configured in vertical, horizontal, or II-type arrangements, primarily adopting the horizontal layout. These facilities are typically equipped with the following systems: in-furnace denitrification system, semi-dry flue gas desulfurization tower, dry powder injection, activated carbon injection adsorption system, and baghouse dust collector. The in-furnace denitrification systems mainly employ selective non-catalytic reduction (SNCR) and selective catalytic reduction (SCR) technologies.