This dataset covers the environmental impacts of oil and natural gas extraction and delivery to coastal facilities. This process includes both the extraction phase and the onshore processing phase. It encompasses methane emissions (fugitive emissions and flaring) in specific regions, produced water discharges, and the direct energy use in oil extraction processes, including drilling, oil pumping, gas injection, and flaring. Flaring refers to the practice by oil and gas companies of routing combustible waste gases generated during various production processes to a flare system or waste gas combustion system for incineration. Additionally, emissions from oil spills associated with drilling and pumping operations are included in this inventory, but crude oil spills related to transportation and refining are not included. Crude oil and natural gas production are often closely linked, requiring material allocation, typically done on an energy basis to ensure scientific fairness and reasonable distribution. Heavy oil reservoirs refer to reservoirs where the crude oil viscosity under reservoir conditions exceeds 50 mPa·s. Crude oil in heavy oil reservoirs has high viscosity and poor fluidity, making it difficult to extract. For low-permeability oilfields with water cut in produced fluids between 80% and 90%, this section assumes a water cut of 85%. The net calorific value of crude oil is 43.4 MJ/kg, with an average calorific value of natural gas at 36 MJ/Sm³. Modeled using representative data from production technologies that reflect the average production level in China. This dataset is based on literature data and has been optimized and modeled using the best available information from 2023.