The dataset covers the environmental impacts of oil and natural gas extraction and transportation to coastal plants. This process includes oil extraction and surface treatment stages. It encompasses methane emissions (fugitive emissions, flaring) in specific regions, produced water discharge, and direct energy use during oil extraction, including drilling, oil pumping, gas injection, and flaring. Flaring refers to the practice in oil and gas production enterprises of conveying combustible waste gases generated during various production processes to a flare system or waste gas incineration system for combustion treatment. In addition, emissions from oil spills related to drilling and pumping operations are included in this inventory, but crude oil leaks associated with transportation and refining are not included. Crude oil and natural gas production are often closely related, requiring material allocation, commonly based on energy measurement to ensure scientific fairness and rational distribution. Heavy oil reservoirs refer to reservoirs where the viscosity of the stored crude oil exceeds 50 mPa·s under reservoir conditions. Crude oil in heavy oil reservoirs has high viscosity and poor fluidity, making it difficult to extract. Low-permeability oilfields with >90% water cut refer to those where the water content in the produced fluid exceeds 90%; this entry assumes a water cut of 95%. The net calorific value of crude oil is 43.4 MJ/kg, with an average calorific value of natural gas of 36 MJ/Sm³. Modeled based on representative data of production technologies, this dataset reflects the average production level in China. This dataset is based on literature data and has been optimized and modeled using the best available information from 2023.