This process includes the oil extraction phase and the surface handling phase. It covers methane emissions (fugitive emissions and flaring) in specific regions, produced water discharges, and direct energy use during oil extraction, including drilling, oil pumping, water injection, and flaring. Flaring refers to the practice by oil and gas companies of transporting combustible waste gases generated during various production processes to flare or thermal oxidation systems for incineration. Additionally, emissions from spills associated with drilling and pumping operations are included in this inventory, but crude oil spills related to transportation and refining are excluded. The production of crude oil and natural gas is often closely related, requiring material allocation, typically based on energy content to ensure scientific fairness and reasonable distribution. Heavy oil reservoirs refer to reservoirs where the viscosity of stored crude oil exceeds 50 mPa·s under reservoir conditions. Heavy oil has high viscosity, poor fluidity, and is difficult to extract. Heavy oil fields with <70% water cut indicate a water cut in the produced well fluid below 70%; this section assumes a water cut of 60%. The net calorific value of crude oil is 43.4 MJ/kg, and the average calorific value of natural gas is 36 MJ/Sm³. Modeling was conducted based on representative data for production technologies, which reflects the average production level in China. This dataset is based on literature data and has been optimized and modeled using the best available information from 2023.