This process includes the oil extraction stage and the surface processing stage. It covers methane emissions (fugitive emissions, flaring) from specific regions, produced water discharges, and direct energy use during oil production, including drilling, oil pumping, steam injection, and flaring. Flaring refers to the practice by oil and gas production companies of channeling combustible waste gases generated during various production processes to a flare system or waste gas combustion system for incineration. In addition, emissions from spills associated with drilling and pumping operations are included in this inventory, but crude oil spills related to transportation and refining are not included. The production of crude oil and natural gas is often closely interrelated, requiring material allocation, typically based on energy content to ensure scientific fairness and rational distribution. Heavy oil reservoirs refer to reservoirs where the viscosity of the stored crude oil exceeds 50 mPa·s under reservoir conditions. Crude oil in heavy oil reservoirs has high viscosity and poor fluidity, making it difficult to extract. Heavy oil fields with water cut <70% indicate that the water content in the produced well fluid is below 70%; this entry assumes a water cut of 60%. The net calorific value of crude oil is 43.4 MJ/kg, with an average calorific value of natural gas being 36 MJ/Sm³. Modeled using representative data on production technologies, this dataset reflects the average production level in China. The dataset is based on literature data and has been optimized and modeled according to the best available information from 2023.