This process includes the oil extraction phase and the surface handling phase. It covers methane emissions (fugitive emissions, flaring) in specific regions, produced water discharges, and direct energy use during oil extraction, including drilling, oil pumping, steam injection, and flaring. Flaring refers to the practice in the oil and gas industry of transporting combustible waste gases generated during various production processes to a flare system or waste gas combustion system for incineration. Additionally, emissions from spills associated with drilling and pumping operations are included in this inventory, but crude oil spills related to transportation and refining are not included. The production of crude oil and natural gas is often closely related, requiring material allocation, typically based on energy content to ensure scientific fairness and rational distribution. Heavy oil reservoirs refer to reservoirs where the viscosity of the stored crude oil under reservoir conditions exceeds 50 mPa·s. Crude oil in heavy oil reservoirs has high viscosity and poor fluidity, making it difficult to extract. Heavy oil fields with 70%-80% water cut refer to those where the water content in the produced well fluid ranges between 70% and 80%; this section assumes a water cut of 75%. The net calorific value of crude oil is 43.4 MJ/kg, with an average heating value of natural gas at 36 MJ/Sm³. Modeled using representative data on production technologies, this dataset reflects the average production level in China. The dataset is based on literature data and has been optimized and modeled using the best available information from 2023.