This process includes oil extraction and surface handling stages. It covers methane emissions (fugitive emissions and flaring) in specific regions, produced water discharge, and direct energy use during oil production, including drilling, oil pumping, water injection, and flaring. Flaring refers to the practice by oil and gas enterprises of transferring combustible waste gases generated during various production processes to a flare system or waste gas incineration system for burning treatment. Additionally, emissions caused by spills associated with drilling and pumping operations are included in this inventory, but crude oil spills related to transportation and refining are not included. The production of crude oil and natural gas is often closely related and requires material allocation, typically based on energy content to ensure scientific fairness and rational distribution. Heavy oil reservoirs refer to reservoirs where the viscosity of the stored crude oil exceeds 50 mPa·s under reservoir conditions. Crude oil in heavy oil reservoirs has high viscosity and poor fluidity, making it difficult to extract. Heavy oil fields with >80% water cut refer to those where the produced fluid from production wells contains more than 80% water; this section assumes a water cut of 90%. The net calorific value of crude oil is 43.4 MJ/kg, and the average calorific value of natural gas is 36 MJ/Sm³. Modeling is based on representative data for production technologies, which reflects the average production level in China. This dataset is based on literature data and has been optimized and modeled using the best available information as of 2023.